Lighting
Autopilot - Dual-Outlet Analog Grounded Timer, 1725W, 15A, 15-Minute On/Off, 24 Hour
Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features: 15 minute on/off 24 hour cycle Controls two outlets simultaneously 15A/1725W UL-listed
$18.99$18.59
Autopilot 24 hr Day & Night Cooling/Heating Thermostat
Autopilot 24 hr Day & Night Cooling/Heating Thermosta Product Details Autopilot 24 hr Day & Night Cooling/Heating ThermostatThe APCET2 is a temperature controller that can be used as a cooling OR a heating device. It automatically powers the device connected based on the selected day and night set points. The user can choose to have different day and night temperature set points that are automatically detected by the built-in photocell. The knobs make it easy to adjust the settings. We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped. Controls heating or cooling equipment with both day/night set points Includes 20' remote precision temperature sensor Temperature control differential +/- 3°F Built-in photocell 50°F–100°F control range 120v, 15 amps max
$79.30$55.87
Autopilot 7-Day Grounded Digital Programmable Timer, 1725W, 15A, 1 Second On/Off, 8 On/Off Cycles
Using a timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features 1 second on/off Up to 8 on/off cycles per day Excellent for hydroponic systems 15 amp UL-listed FOR MORE THAN 8 ON/OFF CYCLES PER DAY, USE APCTART 1 minute on/off Up to 8 on/off cycles per day Excellent for hydroponic systems 15 amp maximum load UL-listed for safety
$23.99$23.49
Autopilot Analog Grounded Timer, 1725W, 15A, 15 Minute On/Off, 24 Hour
Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features 15 minute on/off 15A/1725W Great for lighting, pumps, etc. Includes convenient clam shell packaging UL-listed
$16.69$16.21
Autopilot Analog to Digital Conversion Module
Autopilot Analog to Digital Conversion Module (4/cs) The Autopilot APBC1001 signal conversion module is ideal for facilities utilizing commercial environmental controllers to control lighting. The module converts analog 0–10V and 0–11.5V signal into digital RS-485 signal. It features two analog inputs and four digital outputs, divided into two zones. Each zone controls 256 fixtures, for a total of 512 fixtures per module. The included white data link cables are shielded against electromagnetic interference, with IP65 connectors that protect against dust and liquid ingress. The module is compatible with 1000W, 750W, 315W dual, and 315W single fixtures. Includes: One Autopilot APBC1001 Signal Conversion Module One DC power supply Six 20' white data link cables:(2) data link cables for analog input(4) data link cables for digital output
$196.80$175.99
Autopilot PX2 Advanced Lighting Controller
Product Details More powerful, more reliable, more capable The Autopilot PX2 Advanced Lighting Controller provides precision photoperiod control of up to 512 fixtures in two independently controlled zones, all from one centralized location. Designed to work with any controllable Phantom or Core HID fixtures, as well as PHOTOBIO LED fixtures, the PX2 can control 512 digital HID fixtures (256 per zone), or 100 analog LED fixtures (50 per zone). The PX2 offers the flexibility to operate both zones analog or digital, or one zone analog and the other digital. With this versatile, dual-zone configuration, growers can ... Optimize spectral treatments by checkerboarding lighting technologies within the same environment (e.g., HPS with CMH, LED with CMH) Save power by checker boarding identical fixtures while reducing output to one of the zones during the light cycle within the same environment Alternate rows and zones within the same environment Enhance uniformity by independent control over perimeter versus interior of the environment Powerful features, precise and independent controls: The PX2 provides independent control of the following features in each of its dual zones: Photoperiod timing to control light and dark cycles Photosynthetic photon flux control to precisely schedule the PPF being emitted from fixtures during the light cycle (wattage or percentage) Auto-dimming when temperature exceeds set points Emergency auto-shutdown of lights upon user-defined over-temperature events Configurable restrike delay times to eliminate lamp-damaging hot starts Sunrise/sunset simulation settings to provide a gradual ramp-up and down at both ends of your photoperiod Built-in battery backup Voltage: 100–240V 50/60Hz 0.3 Amps Two dedicated temperature sensors, one for each zone: These sensors provide real-time data for automated temperature-based dimming, as well as a high temperature shutdown feature that protects your garden. The PX2 eliminates inrush current and replaces traditional lighting contactors, reducing infrastructure investment. Updated locking signal and data cables: All cables are shielded from electromagnetic interference to ensure uncompromising signal reliability and communication. Includes: (1) Autopilot PX2 with locking mini 3P IP65 female lighting connectors (2) 50' white temperature probes (2) 20' locking mini 3P M-RJ 6P white RF shielded data cables (for use with controllable Phantoms) (2) 20' locking mini 3P M-2P M white RF shielded data cables (for use with PHOTOBIO LEDs) (1) 5' 100–240V, 50/60Hz power adapter (2) Mounting screws (1) Instruction manual
$411.99$354.24
Autopilot Surge Protector with 8 outlets & timer
Expand wall outlets and control your equipment with this 8-outlet power strip with surge protection and built-in timer. Offers 4 timed outlets and 4 always-on outlets, with indicator lights for each type. Timer has 15-minute increment pins. Timer override switch provided. Lighted power switch also acts as circuit breaker/reset. Features 4 timed, 4 constant outlets Power indicator Surge protector 6' power cord Circuit breaker switch for safety
$31.99$30.23
PX1 Connection Cable, RJ12 to RJ12, 50'
RJ12 to RJ12 Cable, 50' length. For making RJ12 trunk line connections between PX1 and subsequent RJ12 cable splitters RJ12 to RJ12 PX1 connection cable Note: This 50' cable can be used with the Autopilot PPM-5 APCECO2 and its remote CO2 sensor
$21.35$21.07
RJ12 Splitter
Connnects Ballast USB Cable to RJ12 Trunk-Line RJ12 to RJ12 PX1 RJ12 Splitter
$4.72$4.66
RJ12-RJ12 Cord 15'
RJ12 to RJ12 Connection Cable 15 ft in length. RJ12 Trunk-Line Connections Between PX1 and or Subsequent RJ12 Cable Splitters RJ12 to RJ12 PX1 Connection Cable
$10.69$10.55
RJ12-USB Cord 15'
PX1 Connection Cable 15 ft in length. This cable connects the Phantom DE ballast USB port to RJ12 port. Connects Ballast USB Port to RJ12 Port RJ12 to USB PX1 Connection Cable
$13.15
USB-RJ12 Controller Cable Pack, 15' (for Phantoms)
This pack includes all the cables you need to connect a compatible* Phantom 40 Series DE Ballast to the Autopilot PX1 Digital Lighting Controller. Pack includes: 15' RJ12 to RJ12 link cable Provides link between Autopilot PX1 controller to splitter tee Provides link between subsequent splitter tees RJ12 Splitter Tee Provides drop-down point off central trunk line to each ballast 15' USB to RJ12 cable Provides connection between splitter tee and ballast *Current PX1-compatible ballasts: PHB4010, PHB4015, PHB4020, and PHB4025 Includes all the cables you need to connect a compatible Phantom 40 Series DE Ballast to the Autopilot PX1 Digital Lighting Controller 15' RJ12 to RJ12 link cable RJ12 Splitter Tee 15' USB to RJ12 cable
$22.55
